Table Top Tamisium Butane Solvent Extractor

TE175 DELUXE PACKAGE

WITH NON FOOD GRADE BRASS SAFETY QUICK DISCONNECTS

(Shown with optional Stainless Safety QDs that be added later)

COMES WITH BRASS SAFETY QUICK DISCONNECTS AND ALL ACCESSORIES PACKAGE

IF YOU ARE MAKING ESSENTIAL OILS THAT ARE NOT CONSUMABLE YOU MAY WANT TO SAVE AND BUY OUR BRASS FITTED - DELUXE EXTRACTOR OFFERED FOR SALE HERE


Standing over 24 inches with a total width of 8 inches. The 175 ml column has an extraction capacity of 2+ ounces in a 175 ml column and a solvent capacity of 700 ml in both the Extractor Tank and Recovery Condenser Tank. 


New Prices include

  • NEW UPGRADED DESIGN with an upgraded tank design which allows
  • MORE SOLVENT CAPACITY for an increased extraction efficiency to get that extra 3-5% oil out
  • INCREASED AIR BUFFER ZONE to allow more consistent recovery times
  • RAISED TANK BASE to allow better cooling and heating of the tank bottoms.
  • LONGER 1/4 FITTINGS for ease of use when opening and closing valves

Extracts from 2+ ounces (75 grams of plant material ) and recover solvent for reuse.
Comes with Recovery System and BRASS QDs and STAINLESS Valves..
  • Recovery tanks allow Recovery of Solvent for Reuse from Solvent Holding Tanks and Disposable Solvent Canisters.
  • Recovery Tank holds 26 liquid ounces or 700 ml volume
  • The Extractor Tank holds 26 liquid ounces or 700 ml volume
  • Column holds 2+ ounces plant weight or 175 ml volume
  • The RC Tank also allows the use of other solvents in combination with butane or pressurized liquid solvents during the same extraction and servers to recover the solvent for reuse.
  • Comes as a complete recovery system with Accessory Tank, connections and lines;

INCLUDE:

Come with Accessories below as pictured.

  • BRASS SAFETY QUICK DISCONNECTS- 3 Couplers and 6 Nipples
  • Schrader Valve Air Adaptor with High Pressure Caustic Chemical Rated Core.
  • Safety Purge Line with 2 way BRASS SAFETY QDs
  • - One Nickel Plated 1/4" line QD to replace the Line if needed.
  • - One BRASS SAFETY QD to remove the SPL from tank being purged.
  • (When using any Safety QD setup, you can not purge any part of the extractor without a Safety Purge Line with a SAFETY QD)
  • Teflon Nozzle adapter for disposable solvent canisters with FREE Safety Quick Disconnect.
  •  Pressure Guage with Brass SAFETY QD
  • Laser Thermometer, Shoot with laser for temp reading.
  • Sealing Tape
  • 10 pack of both size orings
  • SAVE OVER 15% on these Vital Accessories by ordering this package

SHIPPING INSURANCE INCLUDED

buyUSD $1195
 

 

ADD A NEW CARRY CASE NOW FOR ONLY $89   ($50 OFF)

($50 OFF for Deluxe or Super Deluxe Purchase only) 

These Soft Carry Cases are made of Heavy Woven Fabric and come with Foam Cutouts and Extra Heavy Duty Zippers to support the weight of these heavy extractors. Backpack Style Adjustable Carry with a carry handle on the vertical and horizontal carry planes allowing options to carry as you desire. Comes with the Tamisium Extractor logo embroidered on the top.

 buyUSD $139 

(To get $50 off your case, use the Coupon Code - CASE - when checking out)  )t   The

CUSTOM FITTED CONNECTIONS WITH PRESSURE TEST

buyUSD $40
 

We will custom fit all your Ball Valves and Quick Disconnects using the proper Vices and Torque. After we fit all the ball valves and Quick Disconnects, we will pressure test your Extractor and check it for leaks. Make sure you have no problems by having us do what we have done hundreds of times. And have a ready to use extractor when it arrives at your door. If you elect to do this yourself, I want to inform you that if the stainless parts are not tightened correctly they could bond together. If a leak exist when the parts bond then you will have to cut the fitting off and replace the parts that were damaged. If we damage it, we will replace them at no charge.

 

What follows is a brief explanation for assembly:

To assemble the parts, you must use 3-4 full wraps of tightly wrapped Teflon tape to each and every 1/4" pipe thread. Then take a drop of oil onto the forefinger and thumb pads and twist the oil onto the taped fitting. When you are twisting the ball valves onto the fitting be sure and orient the handles in the correct orientation just at the point where the seal is formed. Do not over tighten. If you find that you have to turn it to far around because it does not seal and you are afraid you may over tighten the part, then take it off, remove all the tape from both parts and apply an additional wrap to what you applied before and repeat the procedure. 
 

Size of column where plant material will be placed.
US pounds = 2 ounces
KILOS = 60 gram weight or 175 ml by volume

All Tamisium Extractors come with a lifetime warranty and lifetime support.
Every extractor comes with a Fully Illustrated Operational Manual

Column capacity represents the volume of plant material you can extract from with that particular size extractor. The weights are a guide to help you find the desired coarseness you need to have your plant material ground to in order to occupy the given space for an efficient extraction to occur. Each column represents 1/4 the volume of the solvent required to extract from the column when full. In other words. The solvent tanks are 4 times larger than the column that holds the organic material being extracted. 1 gallon translates into 1 kilo of material capacity with most dried botanicals when ground up to the proper coarseness

We do not sell these extractors for indoor use in any environment not properly set up to use any flammable solvent for extraction purposes. As most solvents are flamable. Please treat the extractor accordingly no matter the solvent chosen to use. These extractors are sold for use in professional laboratory conditions operating under strict safety guidelines. NO SPARKS OR FLAMES SHOULD BE PRESENT WHEN ANY FLAMMABLE SOLVENT IS USED.

Please remember that most solvents are flammable. When opening and closing any of the extractors, please safely purge the units and do so in a well ventilated, spark free environment. The smaller units can be taken outside. Know the properties of the solvents being used for any process of any extraction with any apparatus. Accessory Safety Purge lines are available for each extractor.